4. Click OK button.
If you disable “enable Manual HyperDrive Clock Rate” box, the engine
Overclocking rate for HyperDrive is set to the default value.
The default value for each ASUS graphics cards is different.
3.9 Abnormal Events
There are three type of abnormal events : unstable voltages, temperature
overheat, and fan malfunction. When ASUS SmartDoctor detects an
abnormal event, it will display a warning message on the upper-left side of
the dialog box.
If you want ASUS SmartDoctor to inform you of abnormal events, enable
the alarm settings in the monitor page.
You can check the Enable Overheat protection or Disable Warning When
Running 3D games in the setting page to facilitate abnormal event
notication.
To Next Page
Loading...
Need help?
General
