To Next Page

To Previous Page

To set the recording parameters:

1. Click to enable Start recording whenever there’s an unusual condition

occurs.

2. When enabled, key in or use the arrows to set the recording duration

in seconds. The default value is 2 seconds.

3. Click OK to save settings and exit.

4.4.4 Record setting

The Record setting section contains parameters that allows you to

congure the recording duration whenever condition is detected. To set

the recording parameters, click the Record setting item from the setup

dialog box. The following submenu appears:

e3325_vga sw_0829.indb 49 2007.8.29 11:34:14 AM

Asus EN8400GS SILENT/DI/512MD2(LP) User Manual

Questions and Answers: