Name: Asus M4N68T-M LE
Brand: Asus
Rating: 4 (1 reviews)

To Next Page

To Previous Page

1.4 Before you proceed

Take note of the following precautions before you install motherboard components or change

any motherboard settings.

• Unplug the power cord from the wall socket before touching any component.

• Before handling components, use a grounded wrist strap or touch a safely grounded

object or a metal object, such as the power supply case, to avoid damaging them due to

static electricity.

• Hold components by the edges to avoid touching the ICs on them.

• Whenever you uninstall any component, place it on a grounded antistatic pad or in the

bag that came with the component.

• Before you install or remove any component, switch off the ATX power supply and

detach its power cord. Failure to do so may cause severe damage to the motherboard,

peripherals, or components.

Onboard LED

The motherboard comes with a standby power LED that lights up to indicate that the system

is ON, in sleep mode, or in soft-off mode. This is a reminder that you should shut down

the system and unplug the power cable before removing or plugging in any motherboard

component. The illustration below shows the location of the onboard LED.

SB_PWR

Standby Power Powered Off

OFF

M4N68T-M LE

M4N68T-M LE Onboard LED

ASUS M4N68T-M LE 1-5

Questions and Answers:

Need help?

Do you have a question about the Asus M4N68T-M LE and is the answer not in the manual?

Asus M4N68T-M LE Specifications

General