ASUS P8P67 4-5
Chapter 4
4.3.3 BT GO!
BT GO! connects a bluetooth (BT) device with the motherboard through Bluetooth connection
for le transferring, le synchronization, music playback, personal manager, and multiple
remote functions.
Launching BT GO!
After installing AI Suite II from the motherboard support DVD, launch BT GO! by clicking
Tool > BT GO! on the AI Suite II main menu bar.
Using BT GO!
Device list
Function list
Click to show the
corresponding setting
pane on the right side
Lights when the
function is enabled
Shot & Send: allows you to snap and transfer the screenshot to the connected BT device.allows you to snap and transfer the screenshot to the connected BT device.
BT Transfer: allows you to share the les stored in the host BT device to anotherallows you to share the les stored in the host BT device to another
connected BT devices.
Folder Sync: allows you to sync or back up the selected folder between the selected BT
devices and the computer.
Personal Manager: allows you to synchronize the personal contacts and calendar
information between the BT device and the system.
BT to Net: allows the system to access the Internet via the network shared by the
Bluetooth device.
Music Player: allows you to play the selected music les in the BT device through the
computer’s speakers.
BT Turbo Remote: provides a user-friendly interface that allows you to use your smartphone
as the remote controller via the bluetooth connection for the BT Turbo Key, Pocket Media,
and Reset/Off functions.
• Click and to scroll the device list and the function list.
• Click any of the device icons to select the device as the connected BT device and BT
GO! will automatically search for the supported functions for the selected device.
• Click any of the device / function icons to connect the selected device and enable /
disable the selected function.
Function introduction
To Next Page
Loading...
Need help?
General
