To reset the alarm, press the confirm button under the reset icon.
To cancel without resetting, press the cancel button under the red ‘X’ icon.
Before remedying, consult the Safety precautions.
Before resetting a warning or shutdown message, always solve the problem. Frequently
resetting these messages without remedying may damage the unit.
3.6 Machine settings menu
Function
The Machine Settings menu provides the ability to view and modify several machine settings.
Swipe left to navigate to the following screens:
• Setpoint 1 (optional)
• Setpoint 2 (optional)
• Regulation
• Control Mode
• Auto Restart
Procedure
To view the Machine Settings menu:
1. Tap the Home button
on top of the screen to go to the main screen.
2. Swipe up on the left vertical swipebar until the Machine Settings menu is shown:
Setpoint 1
Starting from the Machine Settings menu, swipe left until the Setpoint 1 screen is shown.
To select a load and unload setpoint, or to modify the values, see section Select or modify a
setting.
Instruction book
2920 7118 31 33
To Next Page
Loading...
Need help?
General
