• There are 3 possibilities:
•
Local control (1)
• Remote control (2)
• LAN control (3)
After selecting the required control mode, press the Enter key on the controller to confirm your
selection. The new control mode selection is now visible on the main screen.
3.12
Service menu
Menu icon, Service
Function
•
To reset the service plans which are carried out.
• To check when the next service plans are to be carried out.
• To find out which service plans were carried out in the past.
• To modify the programmed service intervals.
Instruction book
2920 7140 52 45
To Next Page
Loading...
Need help?
General
