Version 6.0 13 March 2010
Installation Manual 2. Installing the Device
2 Installing the Device
This section describes the MP-11x (refer to 'Installing the MP-11x Series' 13 on page ) and
MP-124 (refer to 'Installing MP-124' 21 on page ) hardware installation. This includes
physical description, unpacking the shipped package, and mounting and cabling
procedures.
2.1 Installing the MP-11x Series
This subsection describes the MP-11x hardware installation.
2.1.1 Physical Description
The subsections below provide a physical description of the front and rear panels of the
MP-11x.
2.1.1.1 MP-11x Front Panel
The device's front panel provides LEDs for indicating various operating statuses. The figure
below displays the front panel of the MP-118. This is similar to the MP-114 and MP-112
models, differing only in the number of Channel Status LEDs (corresponding to the
number of channels). For a description of the device's LEDs, refer to 'Monitoring Front-
Panel LEDs' 55 on page .
Figure 2-1: MP-11x (e.g., MP-118) Front Panel
To Next Page
Loading...
Need help?
General
