AudioCodes MediaPack Series Hardware Installation Manual

MediaPack Analog Gateways 17 MP-1288
Hardware Installation Manual 3. Physical Description
3.2.1.3 PWR LED
The PWR LED indicates the power status, as described in the table below.
Table 3-5: PWR LED Description
Color State Description
Green
On Chassis receiving power and Power Supply modules are
functioning normally. If the device is configured to use only one
Power Supply module, the LED is lit if at least one of them is
operating normally.
Red
On One of the Power Supply modules is faulty (if device is configured
to use two Power Supply modules).
- Off No power received by the device.
3.2.1.4 FAN LED
The FAN LED indicates the status of the Fan Tray module, as described in the table below.
Table 3-6: FAN LED Description
Color State Description
Green
On Fans are functioning normally.
Red
On At least one fan in the Fan Tray module is faulty.
- Off No power.

AudioCodes MediaPack Series Specifications

General

Brand	AudioCodes
Model	MediaPack Series
Category	Gateway
Language	English