Avocent ESP Serial Hub User Manual

67
CHAPTER
8
ESP-View Diagnostic Utility
The ESP-View diagnostic utility is launched from the web interface. This utility may be used for
datascope, loopback and status functions.
Requirements
• One of the following browsers:
• Internet Explorer 6.0 with service pack 1 or later (Windows systems only)
• Mozilla version 1.7.3 or later
• Firefox version 1.0 or later
• Netscape version 7.2 or later
• JRE (Java Runtime Environment) version 1.4 or higher on the system where the browser is
being used.
• The sockets-based network administration configurable feature must be enabled. See
Configurable Features on page 29 for more information.
Accessing and Exiting the ESP-View Utility
To launch the ESP-View utility:
1. Access the ESP hub web interface (see Accessing the Web Interface on page 31).
2. From the Main Menu of the web interface, select Diagnostic Utility.
The ESP-View utility will launch and the datascope will open.
To exit the ESP-View utility:
From the ESP-View utility menu, select File - Exit.
Datascope
The datascope function collects, displays and saves received data, transmitted data and control
signals from an ESP serial hub. Only a single datascope session may be active at any one time on
a hub.
You may display data from either the most recent collection session or from a previously
saved session.

Avocent ESP Serial Hub Specifications

General

Brand	Avocent
Model	ESP Serial Hub
Category	Switch
Language	English