78 ESP Serial Hub Installer/User Guide
Other CAT 5 adaptors
Reversing adaptors and reversing cables
8 CTS (RS-232) * Clear to Send N/C
9 N/C N/A N/C
RxD(+) and TxD(+) are both connected to pin 4 of the RJ-45 connector.
RxD(-) and TxD(-) are both connected to pin 5 of the RJ-45 connector.
* RTS is tied to CTS inside the adaptor to indicate an RS-485 connection.
Table C.2: RS-485 CAT 5 Adaptor Pin Assignments (Continued)
Pin Number - DB-9 RS-422 Description Pin Number - RJ-45
Table C.3: Adaptors for Use with CAT 5 and CAT 6 Cable
Part Number Description
210122 RJ-45 to DB-9M (DTE) Adaptor
210120 RJ-45 to DB-9F (DCE) Adaptor
210124 RJ-45 to DB-25M (DTE) Adaptor
210123 RJ-45 to DB-25M (DCE) Adaptor
210125 RJ-45 to DB-25F (DTE) Adaptor
210121 RJ-45 to DB-25F (DCE) Adaptor
210127 RJ-45 to RJ-45 Male Adaptor for Cisco and Sun Netra console port
750238 CAT 5 Serial Starter Kit - includes all the above adaptors
210129 DB-9 Female to RJ-45 Adaptor for modem emulation
210133 RJ-45 Male to RJ-45 Female Adaptor for modem emulation
Table C.4: Reversing Adaptors and Cables
Part Number Description
210094 RJ-45 to DB-9M (DTE) Adaptor
210095 RJ-45 to DB-9F (DCE) Adaptor
210090 RJ-45 to DB-25M (DTE) Adaptor
210092 RJ-45 to DB-25M (DCE) Adaptor
210091 RJ-45 to DB-25F (DTE) Adaptor
To Next Page
Loading...
Need help?
General