10 Appendix
10.1 EC Declaration of Conformity
The appliance complies with the standard type described in the EC
declaration of conformity. It has been manufactured and put into
circulation in accordance with the requirements of European Directives.
The original of the declaration of compliance is available from the
manufacturer.
10.2
Information on the ecodesign and energy labelling directives
10.2.1
Specific information
Recommendations
Danger
Only qualified persons are authorised to assemble, install and
maintain the installation.
Ecodesign Directive
This product conforms to the requirements of European Directive
2009/125/EC on the ecodesign of energy-related products.
Technical data - Heat pump water heaters
Tab.21 Technical parameters for heat pump water heaters
SPC 200 SPC 300 SPC 300S
Daily electricity consumption according to
EN16147
Q
elec
kWh 3.205 4.881 6.066
Declared load profile L XL XL
Sound power level, indoors
(1)
L
WA
dB(A) 57 57 57
Storage volume V l 215.0 270.0 265.0
Mixed water at 40°C V40 l 274 380 383
(1) If applicable.
Circulating pump
Important
The benchmark for the most efficient circulating pumps is EEI ≤
0.20.
Disposal and Recycling
Warning
The thermodynamic water heater must be dismantled and
scrapped by a qualified professional in accordance with prevailing
local and national regulations.
1. Switch off the thermodynamic water heater.
2. Cut the mains electricity supply to the thermodynamic water heater.
3. Close the water mains.
4. Drain the installation.
5. Dismantle the thermodynamic water heater.
6. Scrap or recycle the thermodynamic water heater in accordance with
local and national regulations.
Fig.44 Recycling
10 Appendix
7734712 - v01 - 22052019 53
To Next Page
Loading...
Need help?
General
