105
SUPPLEMENTARY FUNCTIONS FOR TRUCKS AND MOBILE HOMES (SELECTED MODELS ONLY) >>>
described in the chapter "Feedback after
route calculation".
You have the following options:
Press the button to close the
message.
enlarge the display area if another
restriction lies ahead of you.
The message will close automatically
once you have left the critical area. In ad-
dition, the message closes automatically
when you approach a new road section
with a restriction.
Warnings without planned route
When the driver warnings function is ac-
tivated in the navigation settings, you will
be warned about road sections where
there are relevant restrictions.
The function is similar as described in the
chapter "Warning with planned route".
Furthermore, the navigation system will
display in which direction you can or can-
not drive at intersections, provided that
the information is available.
Show route
You can display the route on the screen
once you have entered a destination. If a
different route has been selected on the
basis of a profile setting (vehicle dimen-
sions, weight, dangerous goods), the
section of road being avoided because of
this is shown in blue.
On the avoided (blue) route, the restric-
tions are displayed with signs. Select a
traffic sign on the map to display a de-
tailed view of the section of road con-
cerned.
If there are further restrictions on your
route, you can use the arrow keys
to scroll through the list of re-
strictions that are being avoided because
of the vehicle settings you have made.
To Next Page
Need help?
General