137
SETTINGS >>>
Service information
The following button displays
information regarding the Navigation
device.
> Press the
Information button.
The information display appears with the
software version number.
By pressing the
Service information but-
ton, you can display further information
such as used licences, installed contents
and map material. Always quote these
details in enquiries to the service provid-
ed by United Navigation GmbH.
Factory settings
You can reset your Navigation device to
the factory settings.
The following updated data is deleted:
saved destinations, saved routes, the
home address, telephone data, images,
videos etc. saved on the internal memory.
> Press the
Factory reset button.
> Press the
Yes button.
The Navigation device is reset to the
factory settings.
Calibration (model dependent)
If the touch screen responds incorrectly
when buttons are pressed, it needs to be
calibrated.
Starting the calibration
You can start the calibration using the
following button:
> Press the
Calibration button.
The calibration procedure will be started.
You will be guided through the procedure
by means of text instructions.
To Next Page
Loading...
Need help?
General
