53
NAVIGATION MODE >>>
> In the main menu, press the button
New destination.
> Press the
Select Point of Interest
button.
You can choose between:
• a point of interest in the vicinity,
• a point of interest near to an address,
• a point of interest near to a destination,
• a point of interest along the route or
• entering a point of interest directly.
Point of interest in the vicinity
> Press the
POI nearby button.
Press the arrow keys or use
the scroll wheel to scroll through the list
displayed.
> Select one of the available categories.
For some categories, e.g. petrol stations,
a further selection menu is displayed in
which you can narrow down the choice
further, e.g. by brand.
Note:
You can only select points of interest in
the area in question if the GPS reception
is adequate for determining a position.
Otherwise, the last position stored will
be used.
You can extend the places of interest
stored on the device by installing
additional POIs in KML format on your
device via the Content Manager.
Note:
You can also press the
All categories
button. An input menu will then open
and you can enter the name of a point of
interest directly and confirm it.
To Next Page
Loading...
Need help?
General
