136
>>> SETTINGS
Deleting driver profile
You can delete the saved profile data by
pressing the
Delete profile button. The
profile itself will still remain. If the profile
was renamed previously, it will then be
renamed to the original name again
(Profile 1 – Profile 4).
Driver profile Pro (model dependent)
Besides the functions described in the
previous chapter, a Bluetooth® tele-
phone can be used for automatically
changing the profile on devices with
Driver Profile Pro. Whenever the naviga-
tion device is switched on and the last
connected phone is not found, your navi-
gation device checks whether another
telephone is within reach that was se-
lected as a trigger for changing the pro-
file.
Press the Set Auto-connect button. A list
of possible telephones is displayed that
you can use as a trigger for this profile,
select the corresponding telephone by
pressing the appropriate button.
Notice:
In order to use a telephone as a trigger
for changing to another driver profile,
you must first connect the telephone in
the profile to the navigation device in
which the telephone is to be used as a
trigger, (also see "Connecting Blue-
tooth® telephones" on page113).
Furthermore, the Auto-connect setting
must be activated, see "Automatic con-
nection" on page119.
To Next Page
Loading...
Need help?
General
