Bernard Controls AQL Range User Manual

English
4
1 SAFETY
This device complies with current applicable safety standards.
The installation, use, and maintenance, of this unit require a skilled
and trained staff.
Please carefully read this entire document before mounting and
starting-up the actuator.
2 PACKAGING, STORAGE AND MAINTENANCE
2.1 Packaging & Storage
AQL actuators are delivered in a cardboard box equivalent to the size
of the actuator and sit in a cardboard wedge.
Actuators should be stored under a shelter, in a clean and dry place,
and protected from wide temperature variations.

• Avoid placing the actuator directly on the floor.
• Check that the plugs on cable entries are correctly
tightened.
• Check that cover screws are correctly tightened to
ensure weatherproof sealing of the cover.
What to check after storage
Visually check the electrical equipment.
Operate the actuator manually.
What to check on pre-installed actuators
If you expect a long period between the mounting of the actuator
and the electrical wiring:
Visually check that cable entries and cover are tightly closed.
In case of outdoor installation, cover the unit with a plastic
protective film.
2.2 Maintenance
This actuator features lifetime lubrication and does not require any
specific maintenance.
If the actuator operates in a wet atmosphere, it is advised to check
once a year that there is no condensation build-up inside the unit.

Bernard Controls AQL Range Specifications

General

Brand	Bernard Controls
Model	AQL Range
Category	Controller
Language	English