Bernard Controls AQL Range User Manual

English
6
3.2 Configuring position indicator for counterclockwise
closing
As a standard, AQL actuators are configured to close clockwise. If
the actuator must close counterclockwise, you can change the
orientation of the position indicator cap.
Standard indicator orientation
for clockwise closing
Reverse indicator orientation for
counterclockwise closing
How to change cap orientation
Disassemble the cover then the
cap.
Turn the cap 90°.
Reassemble the cap then the
cover.

Bernard Controls AQL Range Specifications

General

Brand	Bernard Controls
Model	AQL Range
Category	Controller
Language	English