5
HTE402559 2/47
Before use VMC-controller, please read this “Safety Instructions” carefully to use
VMC-controller in the right way.
Use of this VMC-controller involves electrical current. There is potential hazard of
electric shock to the operator. Failure to follow these instructions may result serious
personal injury or property damage.
Safety Instructions are classified into “Danger”, “Warning”, “Caution” and “Request”.
This label shows an immediate danger.
Misuse of VMC-controller
and/or risky action of any person should
cause the person serious and/or fatal injury and/or severe damage
to your property.
This label shows an indirect danger.
Misuse of the partsfeed
er and/or risky action of any person should
cause the person injury and/or damage to your property.
This label shows an indirect danger.
Misuse of VMC-controller
and/or risky action of any person might
cause the person injury and/or damage to your property.
This label shows the manufacturer’s strong recommendation to use
the partsfeeder properly.
Misuse of VMC-controller
and/or risky action of any person may
not cause the person injury and/or damage of your property.
■Please keep this “Instruction Manual” on file for further reference giving easy access
to the operator.
■The partsfeeder that is sold or rented to the other must keep this “Instruction Manual”
on it highly visible.
They must use the partsfeeder in the right way.
■Not all danger should be covered by the “Instruction Manual”. Please read the Instruction
Manual and act on the principle of Safety First.
- Please read this article thoroughly without fail -
Danger
Warning
Caution
Request
To Next Page
Loading...
Need help?
General
