Overview
with anti-theft alarm system
(DWA)
OE
General information on
DWA
Any attempt to move the vehi-
cle, change its position, start it
without authorization, or discon-
nect the vehicle battery, results
in the alarm being triggered. The
sensitivity of the system is de-
signed so that minor vibrations of
the motorcycle do not trigger an
alarm. Each theft attempt is sig-
naled following activation of the
system acoustically with the siren
and optically with synchronized
flashing of all 4 turn indicators.
You can adjust the behavior of
your DWA in partial areas to
meet your needs.
Protection of motorcycle
battery
To protect the motorcycle bat-
tery and to maintain the start-
ing capability, the activated DWA
switches off automatically after
several days. However, it remains
active for at least 10 days.
Radio interference
Radio systems or devices which
transmit on the same frequency
as the remote control of the
DWA can interfere with its func-
tion. With corresponding prob-
lems point the remote control at
the motorcycle from a different
direction.
Activation
with anti-theft alarm system
(DWA)
OE
Activate DWA
Switching on ignition ( 58).
Adjust DWA ( 108).
without Keyless Ride
OE
Turn off ignition.
If the DWA is activated, the
DWA is automatically activated
after the ignition is switched
off.
Activation takes approximately
30 seconds to complete.
Turn indicators are illuminated
twice.
Confirmation tone sounds
twice (if programmed).
The anti-theft alarm system is
active.
6
106
z
Alarm system
https://www.motorcycle-manual.com/
To Next Page
Loading...
Need help?
General
