BMW C 400 X User Manual

Rear brake-pad wear
limit
min 0.04 in (min 1 mm) (Only
friction material without carrier
plate. Groove in coating mate-
rial indicates wear limit.)
If the wear marks have been
reached:
WARNING
Dropping below the minimum
pad thickness
Reduced braking action, damage
to the brake
In order to ensure the operat-
ing reliability of the brake sys-
tem, make sure that the brake
pads are not worn beyond their
minimum thickness.
Have brake pads replaced at
an authorized service facil-
ity, preferably an authorized
BMW Motorrad retailer.
BMW Motorrad recommends
only installing original brake
pads from BMW Motorrad.
Checking brake fluid level
of the front wheel brake
WARNING
Insufficient brake fluid in the
brake-fluid reservoir
Considerably reduced braking
performance caused by air in the
brake system
Adjust the riding mode imme-
diately until the fault is rectified.
Check brake fluid level
regularly.
Place the Scooter on its center
stand, ensuring that the ground
is level and firm.
Align handlebars so that brake-
fluid reservoir is positioned hor-
izontally.
Read the brake fluid level on
the sight glass 1 of the right-
hand brake fluid reservoir.
10
141
z Maintenance
https://www.motorcycle-manual.com/

BMW C 400 X Specifications

General

Displacement	350 cc
Transmission	CVT
Fuel System	Electronic Fuel Injection
Front Suspension	Telescopic fork
Front Brake	Single disc, 265 mm
Rear Brake	Single disc, 265 mm
ABS	Standard
Front Tire	120/70 R15
Rear Tire	150/70 R14
Seat Height	775 mm
Fuel Capacity	12.8 liters
Width	835 mm
Engine Type	Single-cylinder, four-stroke
Max Power	34 hp (25 kW) @ 7, 500 rpm
Max Torque	35 Nm
Rear Suspension	Double swingarm
Weight	204 kg
Length	2, 210 mm
Height	1, 305 mm
Wheelbase	1, 565 mm