84 TFT DISPLAY
Please consult the operating
instructions for your communi-
cation system.
Pairing
Call up menu Settings,
Connections.
Bluetooth connections can
be established, managed, and
deleted in the CONNECTIONS
menu. The following Blue-
tooth connections are dis-
played:
Mobile device
Rider's helmet
Passenger helm.
The connection status for mo-
bile end devices is displayed.
Connecting a mobile end
device
Pairing ( 84).
Activate the Bluetooth func-
tion of the mobile end device
(see operating instructions for
the mobile end device).
Select Mobile device and
confirm.
Select Pair new mobile
device and confirm.
Mobile end devices are
searched for.
blinks in the lower status
line during pairing.
Visible mobile end devices are
displayed.
Select the mobile end device
and confirm.
Observe the instructions for
the mobile end device.
Confirm that the codes match.
The connection is established
and the connection status is
updated.
If the connection is not es-
tablished, the troubleshooting
chart may provide assistance.
( 182)
Depending on the mobile
end device, telephone data
is transferred to the vehicle
automatically.
Telephone data ( 93)
If the phone book is not dis-
played, the troubleshooting
chart may provide assistance.
( 183)
If the Bluetooth connection
does not work as expected,
the troubleshooting chart may
provide assistance. ( 183)
Connect the rider's helmet
and the passenger helmet
Pairing ( 84).
Select Rider's helmet or
Passenger helm. and con-
firm.
Show the communication sys-
tem of the helmet.
To Next Page
Loading...
Need help?
General
