Replacing bulb for brake
and rear light
Make sure ground is level and
firm and park motorcycle.
Switch off ignition.
Remove screws 1.
Pull off lens toward rear.
Remove bulb 2 for brake and
rear light.
Replace defective bulb.
Bulb for taillight/brake
light
P21/5W / 12 V / 5 W / 21 W
To prevent contaminants from
being deposited on the glass
surface, always use a clean, dry
cloth to hold the bulb.
Install bulb 2 for brake and rear
light.
Position lens and install
screws 1.
9
119
z
Maintenance
To Next Page
Loading...
