Threaded fasteners
Front wheel Value Valid
Brake caliper on telescopic
forks
M10 x 65 28 lb/ft (38 Nm)
Pinch bolt on quick-release axle
M8 x 35 Tighten the screws 6 times, alternating
between one and the other each time
14 lb/ft (19 Nm)
Screw in front wheel quick-re-
lease axle
M20 x 1.5 37 lb/ft (50 Nm)
Rear wheel Value Valid
Locknut of drive-chain tension-
ing screw
M8 14 lb/ft (19 Nm)
Rear-wheel quick-release axle in
swinging arm
M16 x 1.5 74 lb/ft (100 Nm)
12
149
z
Technical data
To Next Page
Loading...
Need help?
General
