WARNING
Adjusting the brake lever
while driving
Accident hazard
Only adjust the brake lever
when the motorcycle is
stationary.
Turn the adjusting screw 1
clockwise in order to increase
the clearance between the
brake lever and handlebar grip.
Turn the adjusting screw 1
counterclockwise in order to
reduce the clearance between
the brake lever and handlebar
grip.
NOTICE
The adjusting screw is easier to
turn if you push the brake lever
forwards.
Spring preload
Adapting to vehicle load
It is essential to set the spring
preload to suit the load carried by
the motorcycle. Increase spring
preload when the vehicle is heav-
ily loaded and reduce spring
preload accordingly when the
vehicle is lightly loaded.
Adjusting spring preload
at rear wheel
without Electronic Suspension
Adjustment (ESA)
OE
Park motorcycle, ensuring that
support surface is firm and
level.
Remove the seat ( 54).
Remove toolkit 1.
6
70
z
Setting
To Next Page
Loading...
Need help?
General
