ABS error
ABS indicator light lights
up.
Possible cause:
The ABS control unit has de-
tected an error.
It remains possible to continue
riding. It must be noted that
the ABS function is not avail-
able. Observe additional infor-
mation on special situations
which can lead to ABS fault
codes ( 89).
Have the malfunction corrected
as soon as possible at an au-
thorized workshop, preferably
an authorized BMW Motorrad
retailer.
ASC intervention
with Automatic Stability Control
(ASC)
OE
ASC indicator and warning
light flashes rapidly.
ASC has detected instability at
the rear wheel and responded by
reducing the torque. The warn-
ing light flashes longer than the
ASC intervention lasts. This fea-
ture continues to furnish the rider
with visual feedback confirm-
ing that the system has initiated
active closed-loop intervention
even after the critical situation
has passed.
ASC self-diagnosis not
completed
with Automatic Stability Control
(ASC)
OE
ASC indicator and warning
light flashes slowly.
Possible cause:
The self-diagnosis routine was
not completed; the ASC function
is not available. The engine must
be running and the motorcycle
must be moving at a speed of at
least 5 km/h in order for the ASC
self-diagnosis to complete.
Ride off slowly. It must be
noted that the ASC function
is not available until the self-
diagnosis has been completed.
ASC switched off
with Automatic Stability Control
(ASC)
OE
ASC indicator and warning
light lights up.
Possible cause:
The ASC has been deactivated
by the rider.
Switch ASC on.
ASC error
with Automatic Stability Control
(ASC)
OE
ASC indicator and warning
light lights up.
3
33
z
Displays
To Next Page
Loading...
Need help?
General
