BMW G 650 Xmoto Rider's Manual

the adjusting screw in the +
direction.
If you want softer damping,
use a screwdriver to turn
the adjusting screw in the —
direction.
Rebound stage basic
setting
Turn adjusting screw as
far as it will go in the "+"
direction, then back it off
11 clicks in the "-" direc-
tion.
Adjusting damping for
rear wheel
Your motorcycle's hand-
ling will suffer if you do
not match the spring-preload
and damping-characteristic
settings.
Adjust the damping
characteristic to suit spring
preload.
Make sure the ground is
level and firm and place the
motorcycle on its stand.
Adjust damping by turning
nut 1.
If you want to increase
damping, turn nut 1 in
direction A.
If you want to reduce
damping, turn nut 1 in
direction B.
Damping
Turn the bottom knob as
far as it will go in the A
direction, then back it off
13 clicks in the B direc-
tion. (Full load of fuel, with
rider 85 kg)
Tyres
Checking tyre pressures
Incorrect tyre pressures
impair the motorcycle's
4
39
z Operation
ProCarManuals.com

BMW G 650 Xmoto Specifications

General

Displacement	652 cc
Bore x Stroke	100 mm x 83 mm
Compression Ratio	11.5:1
Max Power	53 hp (39 kW) @ 7, 000 rpm
Fuel System	Electronic fuel injection
Cooling System	Liquid cooled
Transmission	5-speed
Front Tire	120/70 ZR17
Rear Tire	160/60 ZR17
Engine Type	Single cylinder, four-stroke
Max Torque	60 Nm (44 lb-ft) @ 5, 250 rpm
Front Suspension	45 mm
Front Brake	Single disc, 2-piston caliper
Rear Brake	Single disc, 240 mm, 1-piston caliper
Fuel Capacity	9.5 l