ing on the right is the rear tyre
pressure. -- -- appears dir-
ectly after the ignition is switched
on, because the sensors do not
transmit tyre pressures until the
first time the motorcycle acceler-
ates to more than 30 km/h.
Lights
Side light
The side lights switch on auto-
matically when the ignition is
switched on.
The side lights place
a strain on the battery.
Do not switch the ignition
on for longer than absolutely
necessary.
Low-beam headlight
The low-beam headlight switches
on automatically when you start
the engine.
When the engine is not
running you can switch on
the lights by switching on the ig-
nition and either switching on the
high-beam headlight or operating
the headlight flasher.
High-beam headlight and
headlight flasher
Push switch 1 forward to
switch on the high-beam
headlight.
Pull switch 1 back to operate
the headlight flasher.
Parking light
Switch off the ignition.
Immediately after switching off
the ignition, press turn-indicator
button 1 to the left and hold
down.
Parking light switches on.
Turn indicators
Operating flashing turn
indicators
Switch on the ignition.
4
55
z
Operation
To Next Page
Loading...
Need help?
General
