Turn adjusting screw 1
clockwise to increase the span
between the brake lever and
the handlebar grip.
Turn adjusting screw 1
counter-clockwise to reduce
the span between the brake
lever and the handlebar grip.
The adjusting screw is easi-
er to turn if you push the
handbrake lever forward.
Mirrors
Adjusting mirrors
Turn the mirror to the correct
position.
Adjusting mirror arm
Push protective cap 1 up over
the threaded fastener on the
mirror arm.
Slacken nut 2 (left-hand
thread).
Turn the mirror arm to the ap-
propriate position.
Tighten nut to the specified
tightening torque, while holding
the mirror arm to ensure that it
does not move out of position.
Mirror on left/right ad-
apter
22 Nm
4
61
z
Operation
To Next Page
Loading...
Need help?
General
