Consult the troubleshooting
chart below if the engine re-
fuses to start. ( 136)
Pre-ride check
The instrument panel runs a test
of the 'General' warning light
when the ignition is switched
on: this is the "Pre-Ride-Check".
The test is aborted if you start
the engine before it completes.
For initialisation, the exhaust flap
is opened fully once and then
closed again.
Phase 1
General warning light shows
red.
CHECK!appears on the dis-
play.
Phase 2
General warning light shows
yellow.
CHECK!appears on the dis-
play.
If the 'General' warning light does
not show:
Some malfunctions cannot
be indicated if the 'Gener-
al' warning light cannot be dis-
played.
Check that the 'General' warning
light comes on, and that it shows
red and yellow.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
ABS self-diagnosis
with BMW Motorrad Integral
ABS II
OE
BMW Motorrad Integral ABS per-
forms self-diagnosis to ensure its
operability. Self-diagnosis is per-
formed automatically when you
switch on the ignition. The mo-
torcycle has to move forward a
few metres for the wheel sensors
to be tested.
Phase 1
Test of the diagnosis-compat-
ible system components with
the motorcycle at a standstill.
ABS warning light flashes.
Phase 2
Test of the wheel sensors as
the motorcycle pulls away from
rest.
ABS warning light flashes.
ABS self-diagnosis
completed
The ABS warning light goes
out.
5
73
z
Riding
To Next Page
Loading...
Need help?
General
