system is minimised, In order
to ensure that the drain on the
on-board power supply system
is minimised, the supply to the
power socket is cut off approxim-
ately 15 minutes after the ignition
is switched off, and it is also tem-
porarily interrupted during the
start procedure.
Cable routing
The cables from the power sock-
et to the auxiliary device must be
routed in such a way that they:
do not impede the rider
do not restrict or obstruct the
steering angle and handling
characteristics
cannot be trapped
Incorrectly routed cables
can impede the rider.
Route the cables as described
above.
Luggage
Correct loading
Overloading and imbal-
anced loads can adversely
affect the motorcycle's handling.
Do not exceed the permissible
gross weight and be sure to
comply with the instructions on
loading.
Set spring preload, damping
characteristic and tyre pres-
sures to suit total weight.
Make sure that the weight is
uniformly distributed between
right and left.
Pack heavy items at the bot-
tom and toward the inboard
side.
Note the maximum permissible
payload of the cases and the
speed limit for riding with cases
on the motorcycle.
Payload of aluminium
cases
with aluminium case
OA
≤10 kg
Maximum permissible
speed for riding with alu-
minium cases fitted to the mo-
torcycle
with aluminium case
OA
≤180 km/h
Note the maximum permiss-
ible payload of the topcase and
the speed limit for riding with a
topcase on the motorcycle.
Payload of aluminium
cases
with aluminium topcase
OA
≤5kg
7
97
z
Accessories
To Next Page
Loading...
Need help?
General
