case, consult your authorised
BMW Motorrad dealer.
Tyre pressure
monitoring RDC
OE
Viewing tyre-pressure
readings
Switch on the ignition.
Repeatedly press button 1 until
the tyre pressures appear on
the display.
The tyre pressures are shown,
accompanied by the wording
RDC P. The front tyre pres-
sure is on the left; the reading
on the right is the rear tyre pres-
sure. The tyre-pressure readings
are based on a reference tyre
temperature of 20 °C.
-- --
appears directly after the ig-
nition is switched on, because
the sensors do not transmit tyre
pressures until the motorcycle
accelerates to 30 km/h.
If the motorcycle is not equipped
with an on-board computer, the
tyre-pressure readings alternate
with the clock.
If the motorcycle is equipped
with an on-board computer, the
tyre-pressure readings alternate
with the clock and the values of
the on-board computer.
Lights
Side light
The side lights switch on auto-
matically when the ignition is
switched on.
The side lights place
a strain on the battery.
Do not switch the ignition
on for longer than absolutely
necessary.
Low-beam headlight
The low-beam headlight switches
on automatically when you start
the engine.
4
53
z
Operation
To Next Page
Loading...
Need help?
General
