with BMW Motorrad Integral
ABS II
OE
Remove screw 1 and remove
the ABS sensor from its bore.
Raise front of motorcycle until
the front wheel can turn freely.
BMW Motorrad recommends
the BMW Motorrad front-wheel
stand for lifting the motorcycle.
Install the front-wheel stand
( 123)
Release axle clamping screw 2.
Remove quick-release axle 3,
while supporting the wheel.
Lower the front wheel to the
ground between the front forks.
Roll the front wheel forward to
remove.
Remove spacing bushing 4
from the front-wheel hub.
Installing front wheel
Possible malfunctions when
ABS and ASC systems in-
tervene if non-standard wheels
are installed.
See the information on the effect
of wheel size on the ABS and
ASC systems at the start of this
chapter.
Threaded fasteners not
tightened to the specified
torque can work loose or their
threads can suffer damage.
8
120
z
Maintenance
To Next Page
Loading...
Need help?
General
