with on-board computer
OE
or
with tyre pressure monitoring
(RDC)
OE
Repeatedly press button 2 until
the clock appears on the dis-
play.
In this case, the button in
the instrument cluster oper-
ates only the tripmeters.
Hold down the button.
Hours reading 3 flashes.
Press the button.
The hours reading increments
by one each time you press
the button.
Hold down the button.
Minutes reading 4 flashes.
Press the button.
The minutes reading incre-
ments by one each time you
press the button.
Hold down the button.
The clock is now set and the
time appears on the display.
Odometer and
tripmeters
Selecting readings
Switch on the ignition.
Press button 1.
4
47
z
Operation
To Next Page
Loading...
Need help?
General
