Press button 1.
The display starts with the cur-
rent value and each time the but-
ton is pressed it moves one step
through the following sequence:
Ambient temperature
Average speed
Average consumption
Range
Oil level
Tyre pressures (OE)
Ambient temperature
When the motorcycle is at a
standstill the heat of the engine
can falsify ambient-temperature
reading 1. If the effect of the en-
gine's heat becomes excessive,
-- temporarily appears on the
display.
If ambient temperature
drops below 3 °C a warn-
ing appears, drawing your atten-
tion to the risk of black ice form-
ing. The display automatically
switches from any other mode
to the temperature reading when
the temperature drops below this
threshold for the first time.
Average speed
Average speed 1 is calculated
on the basis of the time elapsed
since the last reset. Times
during which the engine was
stopped are excluded from the
calculation.
4
50
z
Operation
To Next Page
Loading...
Need help?
General
