Basic setting of rear-sus-
pension damping charac-
teristic
Turn the adjusting screw as
far as it will go in the dir-
ection indicated by the H
arrow and then turn it back
one and a half turns in the
direction indicated by the S
arrow. (Full load of fuel, with
rider 85 kg)
Electronic Suspension
Adjustment ESA
OE
Possible adjustments
Electronic Suspension Adjust-
ment ESA provides a convenient
way of adapting the motorcycle
to the load it carries and the sur-
face over which you intend riding.
You can adapt the suspension
settings for on-road or off-road
riding.
The damping characteristic is
shown in panel 1 of the multi-
function display, and spring pre-
load in panel 2. The odometer
readings are not shown while the
ESA readout is active.
Three spring-preload stages can
be combined with any of three
damper settings for road riding,
while two spring-preload stages
can be paired with any of three
damper settings for off-roading.
The detailed description of the
ESA Electronic Suspension Ad-
justment system starts on page
( 93).
Calling up settings
Switch on the ignition.
Press button 1.
The current setting is
displayed.
The reading remains visible for
a few seconds before disap-
pearing automatically.
Adjusting suspension
damping
Switch on the ignition.
You can adjust the damp-
ing characteristic while the
motorcycle is on the move.
4
68
z
Operation
To Next Page
Loading...
Need help?
General
