Current consumption in l/
100 km
Range in km
Resetting tripmeter
Switch on the ignition.
Select the desired tripmeter.
Press and hold down button 1
until the tripmeter reading is
reset.
Reset the average values
with on-board computer
OE
Switch on the ignition.
Select average consumption or
average speed.
Press and hold down button 1
until the value shown is reset.
Lights
Side light
The side lights switch on auto-
matically when the ignition is
switched on.
The side lights place
a strain on the battery.
Do not switch the ignition
on for longer than absolutely
necessary.
Low-beam headlight
The low-beam headlight switches
on automatically when you start
the engine.
When the engine is not
running you can switch on
the lights by switching on the ig-
nition and either switching on the
high-beam headlight or operating
the headlight flasher.
4
41
z
Operation
To Next Page
Loading...
Need help?
General
