ASC self-diagnosis
with Automatic Stability Control
(ASC)
OE
BMW Motorrad ASC performs
self-diagnosis to ensure its op-
erability. Self-diagnosis is per-
formed automatically when you
switch on the ignition.
Phase 1
Test of the diagnosis-compat-
ible system components with
the motorcycle at a standstill.
ASC warning light slow-
flashes.
Phase 2
Test of the diagnosis-compat-
ible system components while
the motorcycle is on the move
(speed at least 5 km/h).
ASC warning light slow-
flashes.
ASC self-diagnosis
completed
The ASC warning light goes
out.
If an indicator showing an ASC
fault appears when ASC self-
diagnosis completes:
You can continue to ride. Bear
in mind that the ASC function
is not available.
Have the fault rectified as
quickly as possible by a
specialist workshop, preferably
an authorised BMW Motorrad
dealer.
Running in
The first 1000 km
While running in the motor-
cycle, vary the throttle opening
and engine-speed range fre-
quently; avoid riding at constant
engine rpm for prolonged peri-
ods.
Try to do most of your rid-
ing during this initial period on
twisting, fairly hilly roads, avoid-
ing high-speed main roads and
highways if possible.
Comply with the rpm limits for
running in.
Running-in speeds
<5500 min
-1
(Odometer
reading 0...200 km)
<6500 min
-1
(Odometer
reading 200...400 km)
<7500 min
-1
(Odometer
reading 400...600 km)
maximum engine rpm for
short bursts (Odometer
reading 600...900 km)
Do not omit the first inspection
after 500 - 1200 km.
5
61
z
Riding
To Next Page
Loading...
Need help?
General
