your authorised BMW Motorrad
dealer.
Front-wheel stand
Installing the front-wheel
stand
ATTENTION
Use of the BMW Motorrad
front wheel stand without ac-
companying use of centre
stand or auxiliary stand
Risk of damage to parts if vehicle
topples
Place the motorcycle on its
centre stand or another auxili-
ary stand before lifting the front
wheel with the BMW Motorrad
front-wheel stand.
Make sure the ground is level
and firm and place the motor-
cycle on its centre stand.
Use basic stand with front-
wheel adapter. The basic
stand and its accessory
parts are available from your
BMW Motorrad dealer.
Remove screws 1.
Push the two adapters 2 apart
until the front forks fit between
them.
Use locating pins 3 to set the
front-wheel stand to the de-
sired height.
Centre the front-wheel stand
relative to the front wheel and
push it against the front axle.
Align the two adapters 2 so
that the front forks are securely
seated.
Tighten screws 1.
8
137
z
Maintenance
To Next Page
Need help?
General
