ASC telltale and warning
light shows.
Release button 1 within two
seconds.
ASC telltale and warning
light remains on.
The ASC function is deactiv-
ated.
Activating the ASC
function
Press and hold down button 1
until the ASC telltale and warn-
ing light changes status.
ASC indicator and warn-
ing light no longer lights up
and starts flashing if the self-dia-
gnosis is incomplete.
Release button 1 within two
seconds.
ASC indicator and warning
light remains off or contin-
ues flashing.
The ASC function is activated.
You also have the option of
switching the ignition off and
then on again.
An ASC fault has oc-
curred if the ASC indic-
ator and warning light shows
when the motorcycle accel-
erates to a speed in excess
of the minimum stated below
after the ignition was switched
off and then on again.
min 10 km/h
See the section "Engineering
details" for more information
on BMW Motorrad Automatic
Stability Control (ASC):
How does ASC work? ( 125)
Dynamic Traction
Control (DTC)
DTC Switching off
with riding modes Pro
OE
Switching on ignition ( 50).
NOTICE
You have the option of deactiv-
ating the DTC function while the
motorcycle is on the move.
4
70
z
Operation
To Next Page
Loading...
Need help?
General
