When the menu item SETUP
EXIT is displayed, press and
hold button 1 to exit the cus-
tomisation menu.
In order to exit the customisa-
tion menu at any point, press
and hold button 2.
All settings made until then will
be saved.
Anti-lock brake system
(ABS)
Deactivating the ABS
function
Switching on ignition ( 50).
NOTICE
You have the option of deactiv-
ating the ABS function while the
motorcycle is on the move.
Press and hold down button 1
until the ABS telltale and warn-
ing light changes status.
Initially, the ASC symbol
changes status. Press and
hold down button 1 until the
ABS telltale and warning
light responds. Under these
circumstances, there is no
change in the ASC setting.
ABS telltale and warning
light shows.
Release button 1 within two
seconds.
ABS telltale and warning
light remains on.
The ABS function is deactiv-
ated, but the integral function
remains active.
with Hill Start Control
OE
Hill Start Control is still
activated.
See the section entitled "En-
gineering details" for more in-
formation on brake systems
with BMW Motorrad Integ-
ral ABS.
Partially integral brakes
( 122)
with Hill Start Control
OE
Hill Start Control function
( 133)
4
68
z
Operation
To Next Page
Loading...
Need help?
General
