Diagnostic connector
Disengaging diagnostic
connector
CAUTION
Incorrect procedure
followed when loosening the
diagnostic connector for the
on-board diagnosis
Motorcycle experiences malfunc-
tions
Only have the diagnostic con-
nector loosened by a specialist
workshop or other authorised
persons during your next BMW
Service appointment.
Have the work performed by
appropriately trained staff.
Refer to the vehicle manufac-
turer specifications.
Removing battery cover
( 163).
Press the hook 1 and pull the
diagnostic connector 2 out up-
wards.
Press the latches 3 on both
sides.
Disengage diagnostic con-
nector 2 from holder 4.
The interface to the diagnosis
and information system can
be connected to diagnostic
connector 2.
Securing the diagnostic
connector
Disconnect the interface for
the diagnosis and information
system.
Seat diagnostic connector 2 in
bracket 4.
The locks 3 engage on both
sides.
8
167
z
Maintenance
To Next Page
Loading...
Need help?
General
