If the oil level is below the MIN
mark:
Topping up the engine oil
( 139).
If the oil level is above the MAX
mark:
Have the oil level corrected
by a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Topping up the engine oil
Place the motorcycle on its
stand on firm, even ground.
Wipe the area around the oil
filler neck clean.
Insert Torx end of reversible
screwdriver insert 1 into screw-
driver handle 2 (on-board tool-
kit) for additional leverage.
Engage this tool in cap 3 of
the oil filler neck and turn
counter-clockwise to remove.
Checking engine oil level
( 138).
ATTENTION
Use of insufficient engine oil
or too much engine oil
Engine damage
Always make sure that the oil
level is correct.
Top up the engine oil to the
specified level.
Engine oil, quantity for
topping up
max 0.95 l (Difference
between MIN and MAX)
Checking engine oil level
( 138).
Install cap 3 of the oil filler
neck.
Brake system
Checking function of
brakes
Pull the front brake lever.
The pressure point must be
clearly perceptible.
Press the footbrake lever.
The pressure point must be
clearly perceptible.
8
139
z
Maintenance
To Next Page
Need help?
General
