Reinstall the protective cap
after removing the coding
plug.
Remove cap of plug 1.
Press in the lock 1 and pull of
the protective cap.
Install the encoding plug.
Switch on the ignition.
NOTICE
If the encoding plug is in place,
the disabled driving safety sys-
tems remain disabled even after
switching the ignition off and
back on.
The symbol for the encoding
plug 1 is shown on the
display. The riding modes 2
Enduro PRO and
DYNA PRO can be selected
and replace the Enduro and
DYNA riding modes.
Installing front seat ( 90).
Cruise-control system
with cruise control
OE
Switching on cruise
control
Requirement
Cruise control is not available un-
til the Enduro or Enduro Pro rid-
ing mode has been deactivated.
Slide switch 1 to the right.
Button 2 is operational.
4
81
z
Operation
To Next Page
Loading...
Need help?
General
