not be confused with a parking
brake.
Operate the parking brake
lever 1 with force and once
again release it.
The holding symbol is dis-
played.
Hill Start Control has been ac-
tivated.
To switch off Hill Start Con-
trol, operate the brake lever 1
again.
The holding symbol disap-
pears.
Or drive off in first or second
gear.
NOTICE
Hill Start Control is deactivated
automatically when driving off.
General warning light
flashes yellow.
The holding symbol flashes
briefly.
Once the brake has been
fully released, the holding
symbol disappears.
Hill Start Control has been
switched off.
See the section "Engineering
details" for more information on
Hill Start Control.
Hill Start Control function
( 133)
Anti-theft alarm (DWA)
with alarm system (DWA)
OE
Activation
Switching on ignition ( 50).
Customising anti-theft alarm
settings ( 87).
Switch off the ignition.
If the alarm system is activated,
then the alarm system will be
automatically activated when
the ignition is switched off.
Activation takes approximately
30 seconds to complete.
Turn indicators flash twice.
Confirmation tone sounds
twice (if programmed).
Anti-theft alarm is active.
4
84
z
Operation
To Next Page
Loading...
Need help?
General
