BMW R 1200GS User Manual

Replace the defective bulb.
Bulbs for flashing turn
indicators, front
RY10W / 12 V / 10 W
with LED flashing turn indic-
ators
OE
LED
Bulbs for flashing turn
indicators, rear
RY10W / 12 V / 10 W
with LED flashing turn indic-
ators
OE
LED
Use a clean, dry cloth to hold
the bulb in order to keep the
glass free of foreign matter.
Turn bulb 1 clockwise to install
it in the light housing.
Working from the inboard side,
insert the glass into the light
housing and close the housing.
Install screw 1.
Replacing LED rear light
The LED rear light can be re-
placed only as a complete unit.
Consult a specialist workshop,
preferably an authorised
BMW Motorrad dealer.
Replace LED flashing turn
indicators
with LED flashing turn indicat-
ors
OE
LED flashing turn indicators
can only be replaced as a com-
plete unit. Consult a specialist
8
159
z Maintenance

BMW R 1200GS Specifications

General

Final Drive	Shaft drive
Displacement	1170 cc
Power	92 kW (125 hp) at 7, 750 rpm
Torque	125 Nm at 6, 500 rpm
Fuel Capacity	Approx. 20 l
Seat Height	850 / 870 mm
Front Brake	Dual 305 mm discs, 4-piston calipers
ABS	Standard
Wheelbase	1, 507 mm
Transmission	Constant mesh 6-speed gearbox with helical gear teeth
Rear Suspension	Paralever, WAD strut (travel-related damping), spring pre-load hydraulically adjustable (continuously variable) at handwheel, rebound damping adjustable