ATTENTION
Activation of the off-road
mode (Enduro and Enduro
Pro) when riding on-road.
Risk of crash due to lack of sta-
bility when the vehicle brakes or
accelerates in the control range
of ABS or ASC/DTC
Activate off-road mode (Enduro
and Enduro Pro) only for off-
road riding.
Press button 1 repeatedly un-
til the required riding mode is
indicated next to the selection
arrow.
NOTICE
When selecting the Enduro
PRO riding mode: note the de-
activated ABS control for the rear
wheel.
The following ride modes can be
selected:
RAIN: For riding on a rain-wet
road surface.
ROAD: For riding on a dry road
surface.
with riding modes Pro
OE
The following riding modes
are additionally available for
selection:
DYNA: For dynamic riding on
a dry road surface.
Enduro: When riding off-
road with road tyres:
with riding modes Pro
OE
When an encoding plug is
installed, the DYNA PRO
and Enduro PRO riding
modes replace DYNA and
Enduro:
DYNA PRO: For dynamic rid-
ing on dry roadways while tak-
ing into account the settings
made by the rider.
Enduro PRO: For riding off
road with off-road tyres with
large tread blocks while taking
into account the settings made
by the rider.
With the motorcycle at a stand-
still, the selected mode is ac-
tivated after approximately two
seconds.
The newly selected riding
mode is activated as you
ride only when the following
preconditions are satisfied:
Throttle twistgrip is in idle posi-
tion.
Brake is not applied.
4
75
z
Operation
To Next Page
Loading...
Need help?
General
