Install screws 1.
Clutch
Check clutch function
Pull back the clutch lever.
Pressure point must be clearly
perceptible.
If no clear pressure point can be
felt:
Have the clutch checked by an
authorized workshop, preferably
an authorized BMW Motorrad
retailer.
Wheel rims and tires
Check wheel rims
Make sure ground is level and
firm and park motorcycle.
Subject wheel rims to visual
inspection for defects.
Have damaged rims checked
and, if necessary, replaced
by a specialist service facil-
ity, preferably an authorized
BMW Motorrad retailer.
Checking tire tread depth
The handling of your mo-
torcycle can already change
for the worse before the legally
prescribed minimum tread depth
is reached.
Have tires replaced even be-
fore the minimum tread depth
is reached.
Make sure ground is level and
firm and park motorcycle.
Check tire tread depth in main
tread grooves with wear indica-
tors.
Tread wear marks are
integrated into the main
grooves on every tire. If the tire
tread has worn down to the
level of the marks, the tire is
completely worn. The locations
of the marks are indicated on
the edge of the tire, e.g. by the
letters TI, TWI or by an arrow.
When the minimum tread depth
is reached:
Replace the worn tires.
Wheels
Tire recommendation
For every size of tire,
BMW Motorrad has tested and
approved certain makes as
roadworthy. BMW Motorrad
cannot evaluate the suitability of
other tires, and can therefore
7
114
z
Maintenance
To Next Page
Loading...
