BMW R 1200RT User Manual

ASC
Switching ASC function
off and on
Switch on ignition.
Call up the Settings menu
and select ASC.
This menu cannot be called
up while the motorcycle is
on the move.
Select Off (once) to
switch ASC off until the next
time the ignition is switched
on.
If the ASC is switched off,
the ASC warning lamp
comes on.
Select On to switch ASC on.
Alternatively: Switch the igni-
tion off and then on.
ASC warning lamp goes
out; if self-diagnosis has
not been completed, the ASC
warning lamp begins to flash.
Riding mode
Use of the riding modes
BMW Motorrad has developed
three riding scenarios for your
motorcycle from which you can
select the one matching your
situation:
Riding on wet roads
Riding on dry roads
with Pro driving modes
OE
Brisk riding on dry roads
For each of those scenarios, the
optimum balance between en-
gine torque, throttle response,
ABS control and ASC control for
the situation concerned is pro-
vided.
with dynamic ESA
OE
The suspension settings also ad-
just to the selected scenario.
Setting riding mode
Switch on ignition ( 46).
4
59
z Operation

BMW R 1200RT Specifications

General

Displacement	1170 cc
ABS	Standard
Engine Type	Air/liquid-cooled, four-stroke, flat-twin
Power	125 hp (92 kW) at 7, 750 rpm
Torque	125 Nm at 6, 500 rpm
Transmission	6-speed
Fuel Capacity	25 liters
Seat Height	805 mm (adjustable to 825 mm)
Weight	274 kg (with full fuel tank)
Front Suspension	Telelever
Rear Suspension	BMW Paralever
Front Brake	Dual disc, 320 mm
Rear Brake	Single disc, 276 mm
Wheelbase	1, 485 mm