Basic setting of rear
wheel rear-wheel damp-
ing
Turn adjuster wheel as far as
possible clockwise, then 4
clicks counterclockwise (One-
up with load)
Turn adjuster wheel as far as
possible clockwise, then 2
clicks counterclockwise (Two-
up with load)
Electronic suspension
adjustment
with dynamic ESA
OE
Adjustment options
Using the Dynamic ESA elec-
tronic suspension adjustment
system you can easily adjust your
motorcycle to the load being car-
ried.
Using leveling sensors, Dynamic
ESA detects movements of the
running gear and responds to
them by adjusting the damper
valves. As a result, the running
gear is adjusted to the conditions
of the ground.
In addition, the damping char-
acteristic can be made harder
(HARD) or softer (SOFT) relative
to the normal setting (NORMAL).
with Pro driving modes
OE
The suspension setting depends
on the riding mode selected.
Damping set by the riding mode
can be changed by the rider.
Adjust chassis
Start engine.
The damping cannot be ad-
justed while the motorcycle
is being ridden.
Call up the ESA menu.
The possible settings for the
damping characteristic appear
on the display.
Soft: Comfortable damping
Normal: Normal damping
Hard: Sporty, performance-
oriented damping
Select the damping charac-
teristic you want or move the
cursor down to set the vehicle
load.
The load setting cannot be
adjusted while the motorcy-
cle is underway.
4
65
z
Operation
To Next Page
Loading...
Need help?
General
