Have the malfunction corrected
as soon as possible at an au-
thorized workshop, preferably
an authorized BMW Motorrad
retailer.
ABS self-diagnosis not
completed
flashes.
Possible cause:
ABS self-diagnosis not
completed
The ABS function is not avail-
able, as the self-diagnosis
function has not been com-
pleted. (To check the wheel
sensors, the motorcycle must
reach a minimum speed: min
3 mph (min 5 km/h).)
Ride off slowly. It must be
noted that the ABS function
is not available until the self-
diagnosis has been completed.
ABS error
lights up.
Possible cause:
The ABS control unit has de-
tected an error. The ABS func-
tion is not available.
It is possible to continue riding
the motorcycle if you make
allowance for the ABS failure.
You should also take account
of the additional information on
situations that can lead to an
ABS fault ( 100).
Have the malfunction corrected
as soon as possible at an au-
thorized workshop, preferably
an authorized BMW Motorrad
retailer.
ASC intervention
flashes rapidly.
The ASC has detected in-
stability at the rear wheel and has
reduced the torque. The warn-
ing lamp flashes longer than the
ASC intervention lasts. This fea-
ture continues to furnish the rider
with visual feedback confirm-
ing that the system has initiated
active closed-loop intervention
even after the critical situation
has passed.
ASC self-diagnosis not
completed
flashes slowly.
Possible cause:
ASC self-diagnosis not
completed
The ASC function is not avail-
able, as the self-diagnosis
function has not been com-
pleted. (To check the wheel
sensors, the motorcycle must
reach a minimum speed: min
3 mph (min 5 km/h).)
3
36
z
Displays
To Next Page
Loading...
Need help?
General
